With the capability to meet mission-critical requirements, the Tank GT25 (B5381) will add value and performance to any IT rackmount environment. Using a 1U rackmount form factor, the Tank GT25 supports a 650W redundant 1+1 or 650W single PFC power supply, dual Intel® Xeon® 5000/5100/5300 processors support, (12) FBDIMM memory sockets, SATA or SAS hot-swap drive support, dual Gigabit Ethernet ports, PCI-X and PCI Express expansion port options and much more. | Motherboard Features:
Motherboard
• TYAN S5381WG2NR 1U
• Customized 15"x16", (381x406mm)
Processor
• Dual LGA771 sockets
• Up to two Intel® Xeon® 5000/5100/5300 series
(1066Mhz/1333MHz FSB) processors: Dual-Core
Chipset
• Intel® 5000P Memory Controller Hub (MCH)
• Intel® ESB2-E I/O Controller Hub
• Winbond W83627EHG Super I/O chip
• ADT7463 Hardware Monitoring IC (on fan board)
Memory
• (12) dual ranked FBDIMM (Fully-Buffered) sockets
• Four memory channels; supports ECC memory
• Supports max. 48GB of DDR2 533/667 mem.
Expansion
• Aligned (1) 64-bit/133MHz PCI-X slot and (1) x8
PCI-E slot, supporting (1) full height/full length
add-on PCI-X(M2055) or PCI-E(M2082) card
• Aligned (1) 64-bit/133MHz PCI-X slot and (1) x8
PCI-E slot, supporting (1) low-profile PCI-X
(M2057) or PCI-E(M2086) add on card
• 2 usable expansion slots
Integrated Storage Controller
• B5381G25V4H: embedded 4-port SATA 1.0
from ESB2-E - Supports four SATA 1.0 HDDs
running at 1.5Gb/s
• B5381G25W4H/R: integrated SAS controller -
Supports SATA 2.0/SAS ports running at 3.0GB/s
• LSI 1068E SAS controller
• (8) SAS ports; RAID 0, 1, and 1E supported
• Supports Integrated Mirroring, Integrated
Enhanced Mirroring, and Integrated Striping
Networking
• Intel® 82563 GbE PHY supports dual GbE ports
Server Management
• System fan speed monitoring and control
• Support Tyan Server Management (TSM)
• Optional TYAN SMDC Kit, IPMI 2.0 compliant
• Chassis intrusion alert
BIOS
• Phoenix 8Mbit LPC Flash ROM
• Supports ACPI 2.0 & APM 1.2
• PnP, DMI2.0, WfM2.0; Power Management
• Serial console redirect
Integrated PCI Graphics
• ATI ES1000 with 16MB frame buffer | | | Chassis Features:
Enclosure
• Industry 19" rack-mountable 1U chassis
• (1) slim line CD-ROM bay
• (4) 3.5" HDD bays
• Dimensions (inch): 17.2"(W) x 27.9"(D) x 1.71"(H)
• Dimensions (mm): 436 (W) x 708 (D) x 43.5 (H)
Power Supply
• Redundant EPS 12V, 1U, 650W (1+) for
B5381G25W4HR and 650W single for
B5381G25V4H / B5381G25W4H
• 100V~240V AC input
Front Panel Features
• I/O: (2) USB 2.0 ports
• Switch: Power, Reset, NMI, ID
• LED indicators:
HDD active, System Warning, Power, LAN (2), ID
Back I/O Ports
• Stacked PS/2 Mouse and Keyboard ports
• (1) 9-pin UART Serial port
• (1) 15-pin VGA port
• (2) RJ-45 10/100/1000 ports, side-by-side
• (2) USB 2.0 ports side-by-side
• (1) 4-port SAS connector 9SSF-8470)
Cooling
• (7) 40x40x56mm 15000rpm heavy-duty fans
• (2) passive CPU heatsinks
Storage
• Pre-installed slim type DVD-ROM
• Hard Disk Drives support:
- B5381G25V4H: support (4) hot-swap SATA 1.0
HDD with RAID 0, 1, 5, 10
- B5381G25W4H / R: support (4) hot-swap
SATA2.0/SAS
HDD with RAID 0, 1, 5, 10, 1E
Environment Temperature
• Operating temperature 5°C ~ 35°C
Regulatory
• FCC Class A (Declaration of Conformity)
• CE (Declaration of Conformity)
• VCCI
• C-Tick | |
Product Specifications, Manuals, Reviews & Downloads:
Product Specification PDF (340,46 KB)
|
Barebones Chassis 
